Latest From Rigado
News, announcements, and thoughts from the experts on enterprise IoT networks
Activating your C7 badge
This article describes how to activate C7 badge Prerequisites: Make sure you have installed the Cascade 500W gateway for either the Azure Swift Kit or AWS Allegro Kit. Activating the C7 The C7 contains a small, hidden button. To activate the battery on the C7, simply press and hold the button a few seconds. You […]
Important Notice: Using Multiple Cascade-500W Gateways with the Swift Kit
This article is intended for those using multiple Cascade-500W gateways with your Swift Kit, and clarifies limitations that exist with the Azure integration for the Swift Kit. These issues only relate to adding multiple gateways to the same IoT Central application. If you are using multiple gateways with different IoT Central Applications, you can disregard this notice. […]
Activating your Minew S1 Temperature and Humidity Sensor
This article describes how to activate your Minew S1 Temperature and Humidity sensor. Prerequisites: Make sure you have installed the Cascade 500W gateway for either the Azure Swift Kit or AWS Allegro Kit. Activating the S1 The back of the S1 contains a small button. To activate the battery on the S1, simply press and […]
Setting up your Cascade-500W Gateway for the Allegro Kit
This article describes how to install your Cascade-500W gateway to work with the Allegro Kit and AWS. 1. Physical Installation There are two ways to install and connect your Cascade-500W gateway: LTE Mode: using the included power supply and the built-in LTE service. Simply attach the LTE antennas, power on the gateway, and wait a […]
Introduction to the Rigado Allegro Kit
The Rigado Allegro kit is a pre-integrated set of devices that make it easy to create IoT applications for commercial spaces such as smart buildings and retail. The Allegro kit can be used in conjunction with AWS SiteWise and QuickSight to build dashboards, alerts, and integrations with other applications. You can use the Allegro kit […]
Video Tutorial: Setting up your Presto or Swift Kit
Here's a quick video tutorial showing how to set up the Rigado Presto and Swift kits using the onboarding wizard.
Changing the RS40 Occupancy Sensor LED Behavior
This article describes how to enable or disable the RS40 Occupancy Sensor LED Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have activated the RS-40 Occupancy Sensor. 1. Change an Individual RS40 LED Behavior To disable or enable the LED on an individual RS40, select that device from the […]
Adding a New Cascade-500W Gateway to Your Swift Kit
This article describes how to add a new Cascade-500W gateway to an existing Swift kit and IoT Central. With the Swift Kit, you can add multiple gateways to a single IoT Central application instance to expand your pilot to multiple sites, or to increase coverage in a single site. Please read this notice regarding multiple […]
Video Tutorial: Configuring the APS-90E People Counter
Here's a quick video tutorial showing how to set up people counting on the APS-90E. Make sure you have already physically installed and networked your device before following this tutorial.
Setting up your Swift Kit Cascade-500W Gateway
This article describes how to install your Cascade-500W gateway to work with the Swift kit and IoT Central. Note: if you would like to setup your Swift kit with IoT Hub please contact us to assist you. 1. Physical Installation There are two ways to install and connect your Cascade-500W gateway: LTE Mode: using the included […]