Latest From Rigado
News, announcements, and thoughts from the experts on enterprise IoT networks
Introduction to the Rigado Swift Kit
The Rigado Swift kit is a pre-integrated set of devices that make it easy to create IoT applications for commercial spaces such as smart buildings and retail. The Swift kit can be used in conjunction with Microsoft Azure IoT Central to build dashboards, alerts, and integrations with other applications. You can also setup kit to […]
Configuring Counting for the APS-90E
This article describes how to configure the APS-90E device for people counting. Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have physically installed the APS-90E device in the area to be monitored. You have networked and retrieved the IP address of the APS-90E in IoT Central. 1. Login […]
Networking and Viewing the APS-90E in IoT Central
This article describes how to network and view the APS-90E device. Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have physically installed the APS-90E device in the area to be monitored. 1. Setup Network Connectivity There are two options for connecting the Cascade Gateway and the APS-90E. Both […]
Introduction to the Hella APS-90E
The Hella SP-90E is an advanced people sensing camera with a variety of features, including people counting, zone monitoring, and camera recording. This guide will focus on setting up the APS90-E as part of the Rigado Swift kit. The complete documentation for the Hella APS-90E can be downloaded here. This includes tips on physical installation […]
Connecting the E-Status Display to IoT Central
This article describes how to connect the 2.9 inch Rigado E-Status Display to IoT Central . Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. 1. Verify the device is online The E-Status Display comes powered one and will automatically connect to any Cascade Gateway in range. As long as […]
Changing the Text on the Rigado E-Status Display
This article describes how to modify the display text on the 2.9 inch Rigado E-Status Display . Prerequisites: You have installed the Cascade-500W gateway and configured your IoT Central Application. You have verified the E-Status Display is online. 1. Default text options Rigado has pre-built a series of messages that can be displayed on the status […]
Interpreting data from the RS40
Presence To use the RS40 occupancy sensor to detect presence of a location such as a room or hallway it is recommended to place the sensor on the ceiling to give it the largest unobstructed view of the desired area. Alternatively you can place it above doorways or on a wall, it is suggested to […]
RS40 Installation
RS40 Occupancy Sensor Placement Placement and installation of the RS40 occupancy sensor is very important in order to get good occupancy data. This sensor uses Passive Infrared technology to detect the motion of heat. It is line of sight: any opaque object will block the sensor's view and limit coverage. Similarly, windows will also block […]
How often does the sensor data refresh?
By default, the Presto Kit sensors are configured for an optimal combination of "real-time" effect and data use optimization. These settings can be tuned post-install if you have a specific use case in mind, keeping in mind the data consumption limits of IoT Central. Here are the default settings for each device: Hobo MX-100 Temp […]
Can I get more devices to add to my Presto Kit?
Additional devices can be added to your Presto Kit IoT Central application. If you would like to order more sensors or gateways to add to your Presto kit, including other Rigado devices such as the RuuviTag or Minew S1, please contact our solutions team to discuss your particular needs.